the Leadwell LTC-25iS twin spindle turning centre with the following features + specifications:
the 45° massive slant bed
The rigid meehanite cast iron 45° slant bed - with large X and Z axis + tail stock box ways for heavy component support - allows chips to fall directly into the chip tank, avoiding accumulation inside the machine.
The chip tank employs large wheels making it easy to move it for chip removal and cleaning.
All the chips are channeled to the included belt-type lift-up chip conveyor which disposes these outside the machine on the right side.
the directly coupled servo motors The Leadwell LTC series servo motors are directly connected to the ball screws with rigid shaft couplings. These couplings ensure that even under severe loading from sharp corner machining precise interpolation is achieved. This design is superior to both belt driven and flexible shaft coupling designs.
the spindles
Leadwell produces superior spindles. Built with high precision P4 grade bearings the one-piece cartridge ensures precise alignment for smooth run-out free operations.
The massive headstock, rigid spindle and superior bearing design along with high rpm all facilitate heavy stock removal and precision tolerances.
Both the headstock and spindles are machined in a temperature controlled environment and are assembled in a clean room.
the machine capacity maximum swing: 615mm (24.2”) maximum turning diameter: 610mm (24”) maximum turning length: 770mm (30.3”)
the machine travels X-axis travel with heavy duty box guide ways: 305 + 10mm (12” + 0.4”) Z1-axis travel with heavy duty box guide ways: 800mm (31.5”) Z2-axis travel with heavy duty box guide ways: 780mm (30.7”)
the left spindle spindle nose: A2-8 maximum spindle speed: 4000 rpm spindle motor: 18.5kW (25 hp) hydraulic 3-jaw chuck diameter: 12” bar capacity: 85mm (3.35”)
the right spindle spindle nose: A2-8 maximum spindle speed: 4000 rpm spindle motor: 18.5kW (25 hp) hydraulic 3-jaw chuck diameter: 12” bar capacity: 85mm (3.35”)
the tool turret number of tool stations: 12 shank height for square tool: 25.4mm (1”) shank diameter for boring bar: 50.8mm (2”) turret indexing time to adjacent tool: 1.3 seconds turret indexing time 180°: 3.1 seconds
the machine rapid feed rates X-axis: 15m per minute (590” per minute) Z1-axis: 20m per minute (787” per minute) Z2-axis: 20m per minute (787” per minute)
the machine dimension + weight machine + chip conveyor length x width x height: 5080 x 2085 x 2365mm (200” x 82.1” x 93.1”) machine weight: 8900kg (19,621 lbs.)
the control Fanuc 0i-TF Plus with 10.4" LCD/MDI screen.
Note: The above specifications are subject to change without notice.
the Leadwell LTC-25i(MY/S/SM/SMY) multi-tasking turning centre brochure
the Fanuc 0i-MODEL F Plus control brochure
and the following bar feed automation for higher production:
the Iemca Maestro OAB bar feeder video clip
the Iemca Maestro bar feeder video brochure
and the following mist collector to keep your shop clean 'n healthy:
the Aeroex mist collectors catalogue
a Aeroex Mist-Fit 550 mist collector unboxing video